Vehicle trackers | Personal trackers | Asset trackers | CANbus data readers | Fuel level sensors | Accessories


GV55 Lite
GV65 Plus

All products


Compact Motorcycle GPS Tracker


The GMT200 is a water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GMT200's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. Further reduction in current drain is achieved by configuring alternative recharge schemes for the internal battery. It measures 70mm*46mm*17.5mm and weighs only 62g, allowing easier and more covert installation. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.



  • Micro-sized device allowing easier and more covert installation
  • Wide operating voltage 9V to 32V DC
  • Internal u-blox GPS chipset
  • Low power consumption, long standby time with internal battery
  • Quad band GSM/GPRS 850/900/1800/1900 MHz
  • Embedded full featured @Track protocol
  • Multiple I/O interfaces for monitoring and control
  • Internal 3-axis accelerometer for power conservation and motion detection
  • Power consumption can be fully configured
  • Three working power modes
  • Water resistant, IPX6 compliant
  • CE certified





GSM Specifications


Quad band: 850/900/1800/1900 MHz

Compliant to GSM phase 2/2+

-Class 4 (2W @ 850/900 MHz)

-Class 1 (1W @ 1800/1900 MHz)

GPRS GPRS multi-slot class 12
GPRS mobile station class B
RMS Phase Error 5 deg
Max Out RF Power

GSM850/GSM900: 33.0±2 dBm

DCS/PCS: 30.0±2 dBm

Dynamic Input Range -15 ~ -108 dBm
Receiver Sensitivity Class Ⅱ RBER 2% (-107 dBm)
Stability Of Frequency < 2.5 ppm
Max Frequency Error ±0.1 ppm


GPS Specifications

GPS Chipset

56-channel u-blox All-In-One GNSS receiver

Sensitivity Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy

Autonomous: < 2.5m

SBAS: < 2.0m

TTFF (Open Sky)

Cold start: 27s average

Warm start: 27s average

Hot start: 1s average



Digital Inputs Three digital inputs
One positive trigger for ignition detection
Two negative trigger inputs for normal use

Digital Outputs

One digital output: open drain output, 150 mA max current drain with latch

GSM/GPS Antennas Internal only
Indicator LED CEL, GPS and battery status
Mini USB Interface For external power and configuration


General Specifications

Dimensions 70mm*46mm*17.5mm
Weight 62g
Backup Battery Li-Polymer 650 mAh
Standby Time Without reporting: 140 hours
5 minutes reporting: 80 hours
10 minutes reporting: 90 hours
Water Resistance IPX6 compliant
Operating Voltage 8V to 32V DC
Operating Temperature -20℃ ~ +80℃ (without battery)

-40℃ ~ +85℃ for storage (without battery)

Power Management

Three working modes including zero current drain from vehicle when ignition is off


Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Timing Report Report position and status according to preset time schedules
Geo-fence Geo-fence alarm
Power On/Off Report Report when the device is powered on and off
Tow Alarm Alarm trigger based on internal 3-axis accelerometer
Special Alarm Special alarm based on the digital inputs
Low Power Alarm Alarm when backup battery is low
Remote Control Digital outputs can be controlled using the air interface protocol





Monito © All rights reserved