EN

MonitoQueclinkEscort

PRODUCTS

  Vehicle trackers | Personal trackers | Asset trackers | CANbus data readers | Fuel level sensors | Accessories

 

GV200
GB100
GMT100
GMT200
GS100
GV50LTA
GV55
GV55 Lite
GV65
GV65 Plus
GV75
GV300
GV500
GV600W
 

All products

GV200

Full Featured Vehicle Tracker


Description: 
 

The GV200 is a full featured GPS tracker designed for a wide variety of vehicle tracking applications. It has multiple I/O interfaces that can be used for monitoring or controlling external devices. It is supported by a wide variety of accessories. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its quad band GPRS/GSM subsystem supports 850/900/1800/1900 MHz allowing the GV200's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows towing detection. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The @Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.

Features:

Download

  • Wide operating voltage range 8 to 32V DC

  • Internal u-blox chipset

  • Low power consumption, long standby time with internal battery

  • Quad band GSM/GPRS 850/900/1800/1900 MHz

  • Embedded full-featured @Track protocol

  • Multiple input/output interfaces for monitoring and control

  • Internal 3-axis accelerometer for power saving and motion detection

  • Three analog inputs for external sensor

  • Internal or optional external GSM antenna

  • Internal or optional external GPS antenna

  • CE/E-Mark certified

 

 

Specification:

 

GSM Specifications

Frequency Quad band : 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRS

GPRS multi-slot class 10
GPRS mobile station class B

RMS Phase Error

5 deg

Max Out RF Power

GSM850/GSM900: 33.0±2 dBm
DCS/PCS: 30.0±2 dBm

Dynamic Input Range

-15 ~ -108 dBm

Receiver Sensitivity Class ⅡRBER 2% (-107 dBm)
Stability Of Frequency < 2.5 ppm
Max Frequency Error ±0.1 ppm
 

GPS Specifications

GPS Chipset   u-blox All-In-One GPS receiver

Sensitivity  

Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm

Position Accuracy   

Autonomous : <  2.5m
SBAS : 2m
TTFF (Open Sky)         

Cold start: 27s average
Warm start: 27s average
Hot start: 1s average

Interfaces

Digital Inputs 4 digital inputs. Two positive trigger inputs and two negative trigger inputs
Analog Inputs

3 analog inputs (0 to 2.8V)

Digtal Outputs 4 digital outputs. Negative trigger, max current drain 200mA
Two-Way Audio Speaker and microphone on 24 pin molex type connector
GSM/GPS Antenna FAKRA type connector for optional external antennas
Indicator LED GSM, GPS and power
Serial Port Two RS232 serial ports on 24 pin molex type connector. One for configuration the other for external devices (GARMIN protocol support)
 

General Specifications

Dimensions 105mm * 78mm * 24mm
Weight 128g
Backup Battery Li-ion 1100 mAh
Standby Time Without reporting: 310 hours
5 minute reporting: 125 hours
10 minute reporting: 190 hours
Operating Voltage 8 to 32V DC
OperatingTemperature -30℃ ~ +80℃
-40℃ ~ +80℃ for storage
Power Management Full power path management. Backup battery is not used when external power is available
 

Air Interface Protocol

Transmit Protocol TCP, UDP, SMS
Scheduled Timing Report Position reports at pre-set time and distance intervals
Geo-fence   Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
Low Power Alarm Alarm when backup battery is low
Power On Report Report when the device is powered on
Tow Alarm From internal 3-axis accelerometer
Antenna Disconnect Alarm Alarm when the GPS antenna is disconnected
Special Alarm Special alarm based on the digital/analog inputs
Remote Control OTA control of outputs
   

 

info@monito.lt

Monito © All rights reserved